Spy pen camera Business portable recorder pen

Material: aluminium alloy
 
Size(mm): 150(L)x13D
 
Weight(g): 40/140
 
Color: Black and silver design
 
Packing Size:178(L)x90(W)x30(H)

a.5 Microphone and camera:Microphone (3) is used to get the sound signal. Camera (2) is used to ger the image signal.
a.6 Reset : If the video recorder stops responding, please use the suitable non- metallic tool th push the reset button (4).
a.7 Ball-pointPen:Part (6)use fot writing.
b.ON/OFF:Press botton (1) for 2 seconds to start the device.It gets into the video recording mode.Meanwhile the green video in dicator is on.
c.Record video:In the video mode , the device enters into the stanby status for video recording. Now the green light is on. Press the button (1) for short time to start the video recording.The green light flashes quickly . When the  red indicator light flashes , press the button for short time to stop recording  and save the file. Afterward the red light returns to ON mode,In order to ensure the safety and the size of the file,the system will automatically save file every 50 minutes once , and contimue the video recording.
Note:Make sure there is adequate light ing the surrounding and the camera is not blocked by other items. Keep the camera upright and stable. And the object should be more than 50cm from the camera.In order to ensure good sound effect of recording, do not block the microphone hole.
d.Take Phopo:In the video mode, the device enters into the standby status for video recording .Now the green light is on. Press button (1) for 2 seconds, take a picture ,the green light flashes once, complete the photo taking and image saving.Then it returns to the standby status.Into the video and must reboot to get back to camera
Note: Make sure there is adequate light in the surrounding and the camera is not blocked by other items. Keep the camera upright and stable.And the object should be more than 50cm from the camera.
e.Connect the computer:In standby or OFF mode,you can coonect the device with the computer, The computer will pop up a removable disk logo.There is an image file directory for:Disk VIDER.PHOTO.During video recorder and computer transfer data, the red light flashes tardily.For the disconnection. please click 'SAFELY REMOVE HARDWARE' on the right bottom corner of the task bar. Then click to stop the 'USB mass storage device' .Unplug  the USB.The disconnection completes.
Note:According to the computer or system configuration.there will be slight difference for the time of identifying removable disk.Please be patient,During this period,;lease do not press the button to avoid the bad impact of computer hardware.If the computer does not identify the remobable disk long time .disconnect and reconnect the device.If the computer is unable to identify the hardware yet,make sure your operating sustem,driver and USBcable are all in normal condition.Please make sure to disconnect the device in accordance with the normal process th avoid the possible damage for computer and recorder.
f.Charge:Connect to computer USB interface orcharger.During the charging,the red ligt flashes slowly When the battery is fully recharged,the red light stops flashing.
Note:The recorder is with built-in high-capacity lighium polymer battery,The battery is with no memory effect.It can be used and charged at anytime.But for the initial five times of charging,please charge battery to saturation after the battery runs out.It is to activate the battery maximum capacity and maintain the standard working time.In order to maximize the capacity of storage battery , please continue to charge for 30 minutes to 1 hour after the indicator light long bright.
g.Setup time: the video recorder provides the mode to display the video recoed time in vudeo file, you can set the time and the time display or not according th actyal needs,the time display format:'"yeae month.Day Hours:mminutes:seconds",setup times are sa follows:
a.Open the "time" text document , input the time settings string, the string is composed of  "year. month.Day hours.minstes .seconds show/ hide flag."To synchronize the time to write.
b.The file of set-up time has been copied to the root directory ,uninstall hardware,boot complete set-up time.
c.The time set up will be saved to the camera inside.

h. Troubleshooting:
When the storage space is insufficient, the red ligt flashes alternately about 5 seconds,then automatically save the current files and shut down.If you want to continue to use this video recorder, copythe necessary files to computer and delete the old documents in storage in order to free up enough storage space.
When the battery is insufficient , the red light flash,then automaticallu save the current files and shut down,If you want to continue to use the recorder,please charge the attery.
If the video recorder stops responding due to improper operation or other unexpected reason,please use the suitable non-metallic tool to push the reset botton.

4.Parameters

5Warning:
. Application: Please strictly abide relevant regulations and laws.This product should not be used for any illegal purposes.The user is fully responsible for its using purpose.
.Battery:If do not use this recording function after long time please charged it fully before using.
.File security:This product is not a professional storage device,It does no guarantee the integrity and security of saved files.Please back up your important documents on the computer or other storage device timely.
.Video quality:This productis not a professional video recording device,It does not guarantee the video effect can meet your ecpectations.
.Operating tenperature:0-40'C
.Operating humidity:20%-80%.This product does not have the water proof function.So it can not work under the  humid envuronment .
.Shooting brightness:Do not expose the camera directly to strong light,such sa the sun light ,to avoid damage to optical devices.
.Cleaning:Do not use it under te environment with high dust density to avoid the contamination of camera lens or other components, It may affect the working of camera .The camera lens can be cleaned gently by paper or cloth which is used to clean glasses.
.Other matters:The product belongs to sophisticated electronic products.Please make sure that it is not damaged by strong impact and strong vibration,Do not use it ing the place with strong magnetic or strong electric power.
.Note:Please contact with your local dealer for other matters.