SNIPER 6-24x50 Rifle Gun Scope Riflescopes Hunting

Brand Name:SNIPER

Type:Rifle Scope

Color: Matt Black

Model Number:6-24x50

Magnification: 6x-24x

Illuminated Type: Red & Green

Material: Aluminum

Size(mm): 422(L)x65(HD)x50(TD)

Weight(g):805/1090

Battery: 2xCR2032(included)

Packing size(mm): 450(L)x82(W)x80(H)

Major Features:

1.Rugged One Piece Tube Construction for All Terrains / Weather

-Precision machined to exact tolerances from aircraft-grade aluminum alloy.

-Completely sealed and nitrogen filled to stop moisture ingress.

-Perfect for all terrains and all weather conditions.

2.Sealed Windage and Elevation Housing and Turrets

-Windage and elevation housing features machine plate controlled seals, to eliminate risk of water ingress and fogging.

-Turrets are manufactured with easy to grip finger adjusting design, making adjustments simple even whilst wearing 

gloves.

- Positive and precise 1/4 MOA for accurate and consistent shooting.

3.Multi Layer Lens Coating for Optimum Light Transmission

-Unique high tech coatings applied to lens elements ensure much better light transmission to optimize optical 

performance.

-Multi layer coatings ensure maximum utilization of all ambient light to optimize resolution and clarity.

4.Target Turrets with Unique Zero Locking and Zero Resetting Features

-Most ingenious design to offer user friendly functions.

-Easy and repeatable Zero Locking and Zero Resetting provides the most needed protection and convenience. 

5.Wide Field of View with Tatical MilDot Reticle (For Range Estimating Models Only)

-Wide field of view and  edge to edge lens clarity allow for clearly picking up quarry on the peripheral edge of the sight 

picture.

The precise Tactical Mil-Dot reticle allows the shooter to estimate ranges and enhance accuracy.

6.High Quality Precision Machined Parts

Guarantees smooth and accurate operation,and deliver consistent and reliable performance.

7.Illuminated Reticle with Red or Red/Green Dual Illuminated (For Reticle Intensified Models Only)

Adjustable intensity of the Illuminated reticle gives optimum reticle clarity in variable light conditions,increasing accuracy 

in daylight and twilight environments.

A.Range Estimating:

Regular mil-dot reticle found on the market usually has 4 dots on each direction of the cross hair,giving you 9 different 

aiming points for either windage or elevation.If you count the 2 inner tips of the opposite duplex cross hairs , you get 11 

aiming points.Our own 24 Mil-Dot Reticle (TRE) has 6 dots on each direction of the cross hair , giving you 13 aiming 

points or 15 including the inner tips of the duplex cross hairs.

-Range estimating requires common knowledge/experience about your target's actual width or height.

-1mil in a scope reticle is the distance from the center of one dot to the center of the next dot.

-Set your scope at the highest power.View the target through the scope.Place the center of the dot against one edge of 

the target and measure to the opposite edge of the target.

-Once the target has been measured in mils,depending on the scope model, a formula is available to estimate the 

distance of the target.An example formula for 3-9x50 Full Size Scope is provided here for your reference:

Height or Width of Target in Meters x 500 / Height or Width of Target in Mils +Range in Meters (1M= 1.0936 Yards)

-For accurate range estimating the size of the target must be known.Each model comes with its own formula and a pre

-calculated mil-dot table of most used distance estimates to aid the user

B.Care and Maintenance:

1.Take care not to drop or knock the scope once it is zeroed.

2.Keep the protective lens covers in place when the scope is not being used.

3.Maintain the metal surface of the scope by removing any dirt or sand with a soft brush so as to avoid scratching the 

finish.

4.Wipe the lens with a clean flannel cloth to keep it clean and dry.In order to avoid scratcing the glass,ensure both the 

lens and cloth are clean.Do not use finger or finger nail to touch / clean lenses.

5.Store the scope in a cool dry place when not in use.Be careful to  avoid contact with acid, alkaline or corrosive 

chemicals.

6.Do not attempt to lubricate any part of the scope.

7.Do not disassemble the scope.Do noe loosen or remove screws or  parts .Any such or similar actions will void the 

warranty.