OB-524 Air Flow Fender Mesh Port Holes Side Vent

* Model Name: OB-524

* Color: Silver

* Material: Plastic

* Quantity: 2 pcs

* Size(mm): 120(L)x164(W)x13(H)

* Packing Size(mm): 250(L)x221(W)

* Weight(g): 66/112

Feature:

The design is novel, concision, beautiful and big square

Adhesive base, easy to install, suitable for exterior use

Give the incitement that your race sort

Before installation, select the proper place, clean the dust, oil etc with the cleaning-aid

Installation Procedure:

1. Before installation , first placed in the body of the products above to confirm htat you want part of paste.

    Attention to forcibly put this product paste at the surface part of the body will cause product damaged or do not have enough tack and cause, product loss from the body 

    Note if you want to paste the product at the door or around the time the door , make sure that the doors at the time switch will not compete with the products of collisions.

2.In determining the location of paste after the fire at the site want to paste the tag can do with plastic sheets.

   With the body of the partition line and the turn signal, such as tags , then paste can accurately confirm the location , as well as the process of change can paste simple , paste the location of the left and right can also significantly symmetry

3. prior to paste parts remove oil, dust, dirt and wax

4.the product of the back there is double-sided self-adhesive, first remove the self-adhesive protective film

5. the order of 1. Products put paste prior decisions in part

    Note paste to achieve a try. Many times will cause sticky paste declining , it is best not to repeatedly paste . At low temperature conditions , the use of hair dryers and other equipment put some tickers blowing hot 

6. put paste in the body after the Products , and then put all the hard click

   Note paste within 24 hours, the tack stickers will be in a relatively weak state, in this period, we should try to avoid vibration and exposure to water vapor.

Note:

* Can not use the above stated purposes outside

* Comply with that of the right paste because of the operational errors caused by such factors as accidents , breakdown , breakage, atc. ,the Company assumes no liability and compensation.

* In the paste before the paste want a good site to remove dirt, dust, wax, oil, water.

* This product is NOT heat-resistant nature, not to put this product in the hood above paste.

* Paste this product after repeated body spray when the spray when the spray because of the body is not soild reasons, paste Department of the painting there is probably off.

* Car washing, cleaning, when we should pay attention not to damage the product. In the use of washing machines and car wash excessive force when there is possible damage to this product are

* According to the use of different, the products, there is probably shed from the body.

* Long time using this product. Because of sunlight in the removal of this product will stay in the body above the mark on thiss product

* Long time been out of direst sunlight, the products have color loss, surface deterioration of the possible

* Product sticky because of the strong, this product can only be a paste, paste should not be repeated. Products paste this post, except when there is possible to stay in the body-prints

* Because of the use of this product(paste, except for when) the levels of the body and products of deterioration, damage and other losses, the company does not bear all the responsibility and compensation

* Please put this product should not get placed in the children's place, prevent the occurrence of adverse consequences.