Material: Plastic
Product size(mm):115(L)x45(W)x16(H)
Battery: 1xBL-5B (included)
Weight(g):158/190
Packing size(mm):200(L)x125(W)x40(H)
Accessory: with a USB and a car charger
1. About Bluetooth Speakerphone
This versatile Bluetooth speakerphone is specially designed for user to enjoy convenience and freedom of wireless communication. Dual capacity of use on desk-top like a Conference Speakerphone and in-car like a Hands-free car kit. Advanced built-in microphone with D.S.P. solution for Echo Cancellation & Noise Suppression that gives you impeccable full duplex sound quality.
2. Appearance and Function
(1). Speaker
(2). Microphone
(3). LED
(4). Charging Socket (5-pin USB)
(5). Mute Button
(6). MFB B utton (Multi-Function Button)
(7). Volume Increase (V+)
(8) . Volume Decrease(V-)
3. Charging Your Bliuetooth Speakerphone
The Bluetooth speakerphone comes with a rechargeable battery. Prior to using the speakerphone, it is recommended to charge the battery fully for the first time. Normal full charge time is 3 hrs. (approx.)
IMPORTANT:
(1). Charging indication will be delayed for a few minutes if the speakerphone has not been used for a long time or the battery is drained.
(2). To prolong durability of battery, it's recommended to charge the speakerphone whenever low battery is encountered. When battery becomes low, LED will flash red every 3 seconds. Under low battery condition, if speakerphone is continuously used, it'll decrease durability of battery as well as standby time and cause longer charge time than normal 3 hrs. Also, the speakerphone will power off.
(3). The red LED will steady on while charging and steady off when charging is completed.
4. Turning ON/OFF the Speakerphone
Power ON: When speakerphone is under off mode, press and hold the "MFB" for 4 seconds until you hear a short beep. The blue LED will flash 5 times, and then the speakerphone will automatically connect to the last connectd mobile phone.
Power OFF: Speakerphone is under standby mode, press and hold the "MFB" button for 4 seconds until you hear a short beep. The red LED will flash 5 times before power off.
5. Pairing
Piror to using the speakerphone for the first time, you must pair it with a Bluetooth-enabled mobile phoe. The steps below describe pairing instructions for a typical Bluetooth-enabled mobile phone.
(1). Place the speakerphone and mobile phone no more than a meter apart.
(2). Ensure the speakerphone is under OFF mode.
(3). Press and hold the "MFB" button for 6 seconds until the LED flash red and blue alternatively, it is now ready for pairing.
(4). Activate the Bluetooth function on your mobile phone and search fro accessible Bluetooth device by referring to your mobile phone user guide for details.
(5). Select "BT Speaker" from the list.
(6). Enter the pre-programmed code "0000" and press "OK" to pair the speakerphone and the phone. When pairing is completed, the blue and red LED stop flashing, the speakerphone is under the standby mode with the blue LED flashes in every 3 seconds.
(7). Press "Return" to go back to your mobile phone's main menu. Please place the mobile phone and the speakerphone within 10 meters sensing distance. You should now be able to make and recieve calls using your speakerphone.
Note: If the pairing cannot be completed within 2 minutes after the pairing mode is activated, the speakerphone will power off automatically. Please repeat steps above to pair the speakerphone and mobile again.
6. Restore to Default Setting
Please follow the steps below to reset the speakerphone to its original setting and remove all the previous pairing and connection.
(1). Ensure the speakerphone is under standby mode.
(2). Press and hold both of "V+" and "V-" buttons for 10 seconds until the blue and red LED flash 5 times, the nthe speakerphone will resume standby mode. The speakerphone is now back to original setting, and after power on the speakerphone again, it will enter pairing mode automatically.
Notes: If the speakerphone is connected with a mobile phone before restore to default setting, it will enter pairing mode automatically after restored to default. If the speakerphone is not connected with the mobile phone before restore to default setting, it will be under standby mode after restored to default setting.
7. LED Indication
Speakerphone Status LED Indication
Power Off Mode OFF
Power On Blue LED flash 5 times rapidly
Power Off Red LED flash 5 times rapidly
Standby Mode Blue LED flash once every 3 seconds
Standby ( Disconnect Blue LED flash twice every 3 seconds
Bluetooth device)
Standby-Low Voltage Red LED flash once every 3 seconds
Talk in progress Blue LED flash once every 6 seconds
Mute Red LED steady on
Pairing in progress The red and blue LED flash on alternatively
Chargubg in progress Red LED steady on
Charging completed Off
8. Product Specification
Bluetooth Compliance: Bluetooth V2.1+EDR
Operating Frequency Band: 2.4GHz-2.48GHz unlicensed ISM band
Output Power. Class2, up to 10 meters
Support Profiles: HSP and HFP Profiles
Support Multiple Paired Device: Memorize paired data of 8 Bluetooth phones
Stand-by Time: Up to 1000 hours/41 days
Talk Time: Up to 10-12 hours
Battery Charging Time: Aboout 3 hours
Charger Volyage: DC5.0V, 400mA
Battery: 650 mA, BL-5B (Rechargeable Lithium-lon Battery)
Tell us what you think about this item, share your opinion with other people. Please make sure that your review focus on this item. All the reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
Have any question or inquire for this item? Please contact Customer Service. (Our customer representative will get back shortly.)