MiNi Maglite Yellow Light Flashlight (AA)

Material: aluminum alloy
Size(mm): 145(L)x25(HD)x18(TD)
Weight(g): 65/145
Battery:  2XAA  (not included)
Switch:  Twist On/Off
Color: yellow
Packing Size:165(L)x80(W)x25(H)
Lens: glass

OPERATION:

 Large end of battery spring must be snapped into tailcap. Always install batteries with the "+" end facing the head end of the flashlight and the "-" end facing the tailcap end of the flashlight. 

Flood To Spot--Rotate head of flashlight to adjust from a wide flood beam to an intense spotlight. Reverse to shut off.

Candle Mode--Unscrew head of flashlight to expose lamp. Stand flashlight on tail cap end to create a candle effect.

Changing The Lamp--Unscrew the entire head assembly and gently pull lamp from socket. There is a spare lamp in tail cap.

FEATURES:

1. High-intensity light beam from flood to spot with a twist of the twist.

2. Converts quickly to a freestanding candle mode.

3. Rugged, machined aluminum construction with knurled design.

4. Anodized inside and out for improved corrosion resistance.

5. Water and shock resistant.

6. Spare lamp inside tail cap.

7. Long lamp life and efficient power usage.

8. Limited Lifetime Warranty.

9. Detailed warranty, registration and operating instructions are included.

10. Designed, manufactured, and patented in the U.S.A.

WARNING:

Any battery may leak harmful chemicals which may damage skin, clothing, or the inside of the flashlight. To avoid risk of injury. Do not let any material leaked from a battery come in contact with eyes or skin. Any battery may rupture or explode if put in a fire or otherwise exposed to excessive heat. To avoid risk of injury, do not expose batteries to excessive heat. To reduce the risk of personal injury or harm to your flashlight, take the following precautions:

*Use only alkaline batteries from reputable manufacturer.

*Do not use different brands of batteries in the same flashlight.

*When replacing batteries, always replace the whole set.

*Do not try to recharge batteries that are not specifically designed to be recharged.

*Always install batteries with the "+" end facing the head end of the flashlight and the "-" end facing the tail cap end of the flashlight.

*Do not allow children to install batteries unsupervised.

*Follow battery manufacturer's instructions as to proper handing, storage and disposal of batteries.

*Carefully follow the steps listed under INSPECTION AND MAINTENANCE.

INSPECTION AND MAINTENANCE:

For prolonged life and efficiency, it is necessary periodically to inspect and perform preventative maintenance on your flashlight as follows:

1.Inspection 

Any battery may leak caustic solutions or gases which can corrode the inside of your flashlight. You should remove the battery at least once a month and visually inspevt the inside of the flashlight for signs of corrosion. 

2.Separate Storage of Battery

If your flashlight is used infrequently,e.g., once a month or less, it is recommended to remove the battery and store it separately. This helps guard against corrosion and may also prolong battery life.

3.Maintenance

Place a small amount of petroleum jelly on all threads and rubber O-rings every six months.