KTJ Time Alarm Thermometer & Timer - White

* Color: White

* Power: 1 x AAA Battery (not included) 

* Dimension(mm): 77(L)x80(W)x14(H)

* Packing Size(mm): 210(L)x110(W)x20(H)

* Weight(g): 76/95

USING THE THERMOMETER 

1.Use one 1.5 volt. AAA Battery.

2.Push the TIMERTHERMO to THERMO 

3.The thermo-temp. and set temp. will be displayed

The thermo-temp. is showing the current temperature.

The thermo-temp. is showing set temperature for alarm function.

25Degrees Celsius  THERMO-TEMP

50 Degrees Celsius SET-TEMP

4.The default set –temp. is 50 Degrees Celsius. Use the UP or DOWN button to set the proper temperature 

  To decrease the set –temp. press DOWN

  To increase the set –tem. press UP 

  Hold the DOWN or UP button down for a fast decrement or increment.

5.If you have set a Worong temperature, simply press DOWN and UP simultaneously to reset 

6.Press the START button once ,the alarm stand –by mode  will replace the setting mode 

7.The alarm will sound when the THERMO- TEMP. reaches the SET-TEMP.

8.Press STOP button once to stop the alarm . Temp. Range: -50~300Degrees Celsius (-58~572 Fahrenheit)

USING THE TIMER 

The timer is used to keep track of your setting time in hours ,minutes, and/or seconds

1. Push the TIMER-THERMO button to the TIMER .The setting mode will be dispayed.

2. Press the MIN and SEC buttons simultaneously to reset.(You may repeat this 

step anytime to stop or reset the unit.)

3. Use the MIN and SEC buttons to set the time. Press MIN to set minutes and /or 

hours. Press SEC to seconds .

Hold the MIN or SEC button down for a fast increment .When the minute dlgit 

Reach 60,it will advance to an hour.

4.If you have set a wrong time, rest (see setp 2)

5.If you have set the correct time , press the START button once.

 NOTE: Once the time has been set ,DO NOT push the TIMER –THERMO button 

, since it Will cancel the set time .

6.The alarm stand –by mode   replaces the setting mode    the time starts to count down

7.The timer will sound when it counts down to 00:00 00 .

8.Press the STOP button once to stop the alarm.

9.The unit will return to its pre-set position .Your may reset the unit or start again.

10.1.1Meter Sensor wire.

11.Working temperature range for the body.(0~50Degrees Celsius. 32~122 

Fahrenheit)

12. Please do not surpass 300 Degrees Celsiusabove object with this test